Epson Stylus C50 Service Manual page 117

EPSON Stylus C50/C60/C61/C62
2) Insert three hooks and one dowel of the Holder shaft unit in
the order indicated in the following figure.
1
Hooks
Figure 4-40. LD roller shaft holder assembling
When installing the dowel of the LD roller shaft holder to the
Pump unit, move the Pump unit to the right side slightly.
When removing or replacing the CR unit with new one, the
A D J U S T M E N T
following adjustment must be performed in the order below.
R E Q U I R E D
1) Top margin adjustment
2) 1st dot position adjustment
Disassembly and Assembly
2
3
4
procedure (2)
Disassembly
Revision C
109