Table of Contents
Advertisement
Tab
5
SIDE VIEW
• Turn the vehicle body upright.
• Gently bend the tab on one of the sidepipes under the
vehicle body.
• Insert a #8 x ¾" screw through the hole in the vehicle
body floor and into the tab.
• Tighten the screw with a Phillips screwdriver. Do not
over-tighten.
• Repeat this procedure on the other side of the
vehicle body
Steering
Column
6
BOTTOM VIEW
• Wipe the steering column with a paper towel to
remove any excess lubricant.
• Turn the vehicle on its side.
• Insert the straight end of the steering column up
through the hole in the vehicle frame and the vehicle
floor and out through the hole in the dash.
• While holding the steering column in place, turn the
vehicle upright.
ASSEMBLY
Hole
Hole
INSIDE TOP VIEW
Hole
Hole
9
Steering
Column
7
• Position the steering wheel so that the large opening
and the tab on the steering wheel stem are both UP.
• Fit the steering wheel onto the steering column.
8
SIDE VIEW
• Insert the
5
/
" x 1
1
/
" pin through the hole in the end
32
2
of the steering column.
• Lower the steering column so that the pin fits inside
the center of the steering wheel.
Larger
Opening
Steering
Column
Pin
W9418pr-0920
Advertisement
Table of Contents
