LG WD-65160F Owner's Manual page 20

H ow to use washer
Start/Pause
1. Start
• This Start/Pause( ) button is used to start
wash cycle or pause the wash cycle.
2. Pause
• If temporary stop of wash cycle is needed,
press the Start/Pause( ) button.
• When in Pause, the power is turned off
automatically after 4 minutes.
• NB. The door will not open before 1 to 2
minutes when Pause is selected,
or at the end of the wash cycle.
Drain
Power
1. Power
• Press the Power button to turn power on
and off
2. Initial Program
• When the Power button is pressed, the
washer is ready for Cotton program. And
the other initial conditions as follows.
• So, if you want to advance into the
washing cycle without changing the
program, just press the Start/Pause( )
button and then the washer will proceed.
Initial program
[WD(M)-65160F]
-Cotton Program/Main Wash/
Normal Rinse/650 rpm/60˚C
[WD(M)-80160F]
-Cotton Program/Main Wash/
Normal Rinse/800 rpm/60˚C
[WD(M)-10160(5)F]
-Cotton Program/Main Wash/
Normal Rinse/1000 rpm/60˚C
Drain
19