Fingerprint Sensor - Toshiba Libretto U100 User Manual

Problem
Double-clicking
(AccuPoint control
buttons) does not work

Fingerprint Sensor

Problem
Reading of the
fingerprint was not
successful.
The fingerprint cannot
be read due to injuries
to the finger.
USB mouse
Problem
On-screen pointer
does not respond to
mouse operation
Double-clicking does
not work
User's Manual
Procedure
Try changing the double-click speed setting in
the mouse control utility.
1. Click start, click Control Panel, click
Printers and Other Hardware and select
Mouse icon.
2. Click the Buttons tab.
3. Set the double-click speed as instructed and
click OK.
If problems persist, contact your dealer.
Procedure
Please try again using the correct posture. Refer
to Using the Fingerprint Sensor
Operating Basics.
Please try reading the fingerprint again using
another enrolled finger.
Please try reading the fingerprint using another
enrolled finger.
If fingerprints from all the enrolled fingers cannot
be read, please logon by using the keyboard to
input the password for the time being.
If problems persist, contact your dealer.
Procedure
The system might be busy. If the pointer is
shaped as an hourglass, wait for it to resume its
normal shape and try again to move it.
Make sure the mouse is properly connected to
the USB port.
Try changing the double-click speed setting in
the mouse control utility.
1. Click start, click Control Panel, click
Printers and Other Hardware and select
Mouse icon.
2. Click the Buttons tab.
3. Set the double-click speed as instructed and
click OK.
Troubleshooting
in Chapter 4,
9-13