Connecting - Toshiba Libretto U100 User Manual

3. Wind the modular cable around the ferrite core as in the diagram shown
below.
Wind the modular cable loosely one full round around the ferrite core.
Please do not forcibly pull the modular cable when winding.
4. Please ensure that the ferrite core is closed properly without the cable
or connector stuck in between. Please close properly until the core is
locked with a clicking sound.
5. Insert the modular cable connector (near to where the ferrite core is
attached) to the modem jack of the computer.
Ensure that the connector clicks and is inserted properly. Please do not
mistake the modular jack with the LAN connector as their shapes are
similar.
As a wrong insertion of the modular cable into the LAN connector can
result in product failure, please ensure that the correct jack is used
before inserting.

Connecting

To connect the modular cable, follow the steps below.
The modular cable that comes with the computer must be used to connect
a modem. Connect the end of the modular cable with the core to the
computer.
User's Manual
Figure 4-12 Furling the modular cable
Figure 4-13 Furling the modular cable
Operating Basics
Modular cable
Ferrite core
4-31