Preset Timing Modes - Samsung SyncMaster 740NW Manual

Environmental considerations
Operating
Storage
Plug and Play Capability
This monitor can be installed on any Plug & Play compatible system. Interaction of the monitor and
computer systems will provide the best operating conditions and monitor settings. In most cases,
monitor installation will proceed automatically, unless the user wishes to select alternate settings.
Dot Acceptable
TFT LCD panel manufactured by using advanced semiconductor technology with precision of 1ppm
(one millionth) above is used for this product. But the pixels of RED, GREEN, BLUE and WHITE
color seem to be bright sometimes or some of black pixels could be seen. This is not from bad
quality and you can use it without uneasiness.
For example, the number of TFT LCD sub pixels that is contained in this product are 2,764,800.
Note: Design and specifications are subject to change without prior notice.
Class B Equipment (Information Communication equipment for residential use)
This product complies with the Electromagnetic Compatibility Directives for residential use and can
be used in all areas including common residential areas.
(Class B equipment emits less electromagnetic waves than Class A equipment.)
PowerSaver
This monitor has a built-in power management system called PowerSaver. This system saves energy
by switching your monitor into a low-power mode when it has not been used for a certain amount of
time. The monitor automatically returns to normal operation when you press a key on the keyboard. For
energy conservation, turn your monitor OFF when it is not needed, or when leaving it unattended for
long periods. The PowerSaver system operates with a VESA DPMS compliant video card installed in
your computer. Use a software utility installed on your computer to set up this feature.
State
Power Indicator
Power Consumption

Preset Timing Modes

If the signal transferred from the computer is the same as the following Preset Timing Modes, the
screen will be adjusted automatically. However, if the signal differs, the screen may go blank while
the power LED is on. Refer to the video card manual and adjust the screen as follows.
Temperature : 10°C ~ 40°C (50°F ~ 104°F)
Humidity : 10% ~ 80%, non-condensing
Temperature : -20°C ~ 45°C (-4°F ~ 113°F)
Humidity : 5% ~ 95%, non-condensing
Normal Operation
Blue
Less than 20 W
This monitor is EPA ENERGY STAR
compliant when used with a computer equipped with VESA DPMS
functionality.
As an ENERGY STAR
product meets the ENERGY STAR
Power saving mode
Blue Blinking
Less than 1 W
®
compliant and ENERGY2000
®
Partner, SAMSUNG has determined that this
®
guidelines for energy efficiency.
Power off
(Power button OFF)
EPA/ENERGY 2000
Black
Less than 1 W