Samsung SyncMaster 740NW Manual page 70

Have the screen colors
become strange after
running a program or due
to a crash between
applications?
Has the video card been
set properly?
The screen Have you changed the
suddenly has video card or the driver?
become
Have you adjusted the
unbalanced.
resolution or frequency to
the monitor?
The screen can be unbalanced due to the cycle of the video card signals. Readjust
Position by referring to the OSD.
The screen is Have you adjusted the
out of focus or resolution or frequency
OSD cannot be on the monitor?
adjusted.
LED is blinking Is the frequency properly
but no images adjusted when checking
on the screen. the Display Timing on the
menu?
There are only Have the Windows colors
16 colors been set properly?
shown on the
screen.
The screen
colors have
Has the video card been
changed after
set properly?
changing the
video card.
There is a Have you installed the
message that monitor driver?
reads
See the video card
"Unrecognized
manual to see if the Plug
monitor, Plug &
& Play (VESA DDC)
Play (VESA
function can be
DDC) monitor
supported.
found".
Check when MagicTune™ feature is
MagicTune™ found only on PC (VGA)
does not with Window OS that
function supports Plug and Play.
properly.
MagicTune™ Have you changed your
doesn't work PC or video graphic
properly. card?
Did you install the
program?
Reboot the computer.
Set the video card by referring to the video card
manual.
Adjust screen image position and size using the OSD.
Adjust the resolution and frequency at the video card.
(Refer to the Preset Timing
Adjust the resolution and frequency of the video card.
(Refer to the Preset Timing
Adjust the frequency properly by referring to the video
card manual and the Preset Timing
(The maximum frequency per resolution may differ
from product to product.)
Windows ME/2000/XP:
Set the colors properly at the Control Panel ¡ æ
Display ¡ æ Settings.
Set the video card by referring to the video card
manual.
Install the monitor driver according to the
Installation Instructions.
Install the monitor driver according to the
Installation Instructions.
* To check whether your PC is available for
MagicTune™ feature, follow the
steps below (When Windows is XP);
Control Panel -> Performance and Maintenance ->
System -> Hardware -> Device Manager -> Monitors -
> After deleting Plug and Play monitor, find 'Plug and
Play monitor' by searching new Hardware.
MagicTune™ is an additional software for the monitor.
Some graphic cards may not support your monitor.
When you have a problem with the graphic card, visit
our website to check the compatible graphic card list
provided.
http://www.samsung.com/monitor/magictune
Download the latest program. The program can be
downloaded
http://www.samsung.com/monitor/magictune
Reboot the computer after installing the program for
the first time. If a copy of the program is already
installed, remove it, reboot the computer, and then
install the program again. You need to reboot the
computer for it to operate normally after installing or
Modes).
Modes).
Modes.
Driver
Driver