Dampers - GE WCVH4800K Technical Service Manual

4. Pull the tub gasket off the outer tub lip.
Note: When installing the tub gasket on the outer
tub, align the tab on the gasket with the arrow
located on the front of the outer tub before installing
and tightening the clamp bolt.
Tab
Each of the 2 dampers are attached to the outer
tub with a 10-mm hex head screw and secured to 2
fl anges in the bottom of the chassis with a 13-mm
hex head bolt.
Outer To remove the dampers:
Tub
Lip
1.
2.
Note: Before removing the right side damper, to gain
extra clearance, it may be necessary to remove the
drain pump. (See
3. Remove the 13-mm hex head bolt from the
4. Compress and remove the damper from the 2
Arrow
– 46 –

Dampers

Remove the back cover. (See
Remove the front panel. (See
Drain Pump
bottom of the damper.
fl anges in the chassis.
.)
Back Cover
.)
Front Panel
.)
Flanges
(Continued Next Page)