Connecting The Glasstron Connecting The Video Equipment - Sony Glasstron PLM-A55 Operating Instructions Manual

Connecting the Glasstron
Connecting the video equipment
Connect a VCR, Laser disc player, DVD player, or camcorder to the power supply box as shown
below.
Power supply box
A/V IN
to A/V IN (special minijack)
About the audio/video input jack
The audio/video input jack of the Glasstron is a
special minijack, and the signal connections are
aligned as shown on the right. This alignment
may differ depending on the equipment.
12
-GB
VCR, Laser disc player, DVD player, camcorder, etc.
to audio/video outputs
(phono jack)
Video
(yellow)
Audio/video cable (supplied)
(special miniplug ˜ phono
plug)
Audio/video cable (supplied)
(special miniplug ˜ special miniplug)
Audio L
Audio R
(red)
Audio L
Camcorder,
(white)
Video CD player,
etc.
to audio/video
output (special
minijack)
(DCR-PC10, etc.)
(D-V8000, etc.)
Audio R
GND
Video