Turning on the Glasstron
After you complete all of the connections and put on the Glasstron properly, turn on the
Glasstron and follow the procedures below.
1 Checking the display unit position n This page
2 Checking the screen position alignment n Pages 18 through 20
3 Setting a password n Page 21
If you do not want to use a password, you have to set the Glasstron to operate without
using a password in "Setting the password."
Checking the display unit position
Every time you turn on the Glasstron, the adjustment screen appears to help you adjust the
display unit properly. Adjust the display unit following the procedure below.
1
Turn on the Glasstron using the POWER switch.
The POWER lamp lights up.
2
Read the WARNING and press the jog dial.
3
Read the next WARNING and press the jog dial.
16
-GB
POWER
ON / OFF
PUSH DISPLAY
SEL / PUSH EXEC
PUSH DISPLAY
SEL / PUSH EXEC
Screen
WARNING
FOR YOUR SAFETY AND TO
PREVENT EYE OR OTHER
INJURY, READ AND FOLLOW
ALL INSTRUCTIONS IN THE
USER'S MANUAL.
CHECK
WARNING
FOR YOUR SAFETY AND TO
PREVENT EYE OR OTHER
INJURY, READ AND FOLLOW
ALL INSTRUCTIONS IN THE
USER'S MANUAL.
CHECK
WARNING
THIS PRODUCT SHOULD NOT
BE USED BY CHILDREN AGE
15 OR YOUNGER.
SEE THE USER'S MANUAL
FOR DETAILS.
CHECK