Table of Contents
Advertisement
Troubleshooting
Troubleshooting
Advisory Messages
Message
Check Satellite Antenna
No Satellite Signal
Satellite Radio not available
Waiting for Satellite
initialization
Unsubscribed channel
Game Alert memory full
Show Alert memory full
Initializing Shows & On
Demand
Shows & On Demand is Off-
Line
This channel is locked
Please wait
Preparing media
Pending Broadcast
34
The satellite antenna is not connected to the dock. Connect the
satellite antenna to the ANT connector on the dock.
Lynx is not receiving the satellite signal from the satellite antenna.
Verify that the antenna is correctly mounted on the vehicle, and that
nothing is blocking the view of the sky.
Make sure that the antenna cable is firmly and securely plugged into the
dock, and that the antenna cable is not bent or broken.
Turn Lynx Off, then On, to reset this message.
If this message persists, the antenna cable may have been damaged.
Replace the antenna.
To listen to Satellite Radio, Lynx has to be in a powered dock, with a
properly installed Satellite Radio antenna connected and correctly aimed.
Lynx is initializing and acquiring the Satellite Radio signal. Wait a moment
for initialization to complete, and Lynx will begin playing Satellite Radio.
You have attempted to tune to a channel which is not in your
subscription plan. Upgrade your subscription, or tune to a channel in
your subscription plan.
You have attempted to add more than 100 Show Alerts or Game Alerts.
Game and Show alerts are limited to 100 each. Delete some old alerts
before adding new ones.
Shows & On Demand is being prepared for viewing. Wait a moment for
initialization to complete.
You have selected to view the Shows & On Demand guide for a listening
mode which is not currently connected (satellite or Internet Radio). Some
of the information in the guide may not be up to date.
You have enabled Parental Control for channels with mature content
(xL). Tap and enter your Lock Code to listen to the channel.
Lynx is busy with a task. Wait a moment for Lynx to finish.
The microSD card is being formatted. Wait for the formatting to finish.
You have selected to listen to traffic and weather, but the traffic/weather
for your selected city isn't being broadcast at the moment. Lynx will
automatically tune the traffic and weather when the broadcast begins.
Explanation
Advertisement
Table of Contents
