Advertisement
After installation, please refer to operation, maintenance and troubleshooting sections in this manual.
If your fan is packaged with a light kit or if you wish to install a separately purchased light kit,
STANDARD WIRING OPTION
*ATTACH BLUE WIRE
ONLY IF ATTACHING
LIGHT KIT WITH FAN
Secure with
twist-lock wire
connectors
(included)
For pullchain controls, follow diagram above.
Make sure that all exposed wiring is secured
inside wire nuts. Note: Wires from house may
vary in color and may not include ground wire.
After wiring is conplete, gently push
wires into junction box with wire nuts
7
pointing upward. Refer to point 3 of
safety tips.
10
To gain access to the blade bracket
attachment holes remove the switch
12
housing cover by unscrewing the three
screws. Gently slide the cover off .
I
NSTALLATION
please refer to the insert sheet titled: L
WIRING OPTION WITH WALL SPEED CONTROL
*
For control of fan and optional light from wall
location, follow diagram above. NOTE: A
professional electrician is recommended
8
for this type of installation.
C
-B
OMBO
LADE
Combo-Blades feature two high quality
finishes on one blade. Select the one
that best complements your decor, or
change the style with just a flip of the
blade.
Shipping
Stabilizer
Tab
Check the motor for plastic shipping stabilizer
tabs, and remove them if they are
present. Attach blade assembly to motor
13
using the motor screws and washers
provided. Tighten screws securely.
Note:
K
I
IGHT
IT
NSTALLATION
Wall
control
Attach blade brackets to blades
11
using the blade bracket screws and
washers provided.
Raise the canopy up and align the two
holes in the canopy with the two holes in
9
the hanger bracket. Secure with two 5/
32 x 1/2" screws provided.
Fabric
Washers
After attaching blade; reinstall the
14
switch housing using the three screws
previously removed.
Advertisement
