Summary of Contents for Sea gull lighting 15070 Series
Page 1
Owner’s 15070-UL-ENG Manual Ceiling Fan Installation Instructions Total fan weight with light For 15070 Series Fans READ AND SAVE THESE INSTRUCTIONS HC-1274...
Installation 15070-UL-ENG AFETY WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS, OBSERVE THE FOLLOWING: READ AND SAVE THESE INSTRUCTIONS Installation work and electrical wiring must be done by qualified person(s) in accordance with applicable codes and standards (ANSI/NFPA 70- 1999), including fire-rated construction.
Page 3
15070-UL-ENG Insert downrod into yoke on top of Raise fan with downrod assembled to fan body. Align the hole in the down- the ceiling bracket and hang fan rod with hole in the yoke. Insert pin Tighen set screws and nuts to secure assembly.
Page 4
15070-UL-ENG To install without light kit refer to step 25 Install the switch housing using Connect plug from fan to plug from screws removed from fan lower cover switch housing. plate. To install lights in the upward posi- Install glass onto light kit and then Remove lock rings.
Trouble Shooting 15070-UL-ENG If you have difficulty operating your new ceiling fan, it may be the result of incorrect assembly, installation, or wiring. In some cases, these installation errors may be mistaken for defects. If you experience any faults, please check this Trouble Shooting Chart. If a problem cannot be remedied, or you are experiencing difficulty in installation, please call our Customer Service Center at the number printed on your parts list insert sheet.