Table of Contents
Advertisement
PLANET WNL-9310
Configure WPA Radius
To add a profile
1.
On the Profile Manager tab, complete the settings on this screen.
2.
Verify that the settings you configured are correct.
3.
Click Save Profile.
To export profile
1.
On the Profile Manager tab, click Export Profile. The Save As dialog box appears.
2.
Type a name for the profile that you are saving, and then verify that the file name extension
is set to ".cfg".
3.
Click Save
To import profile
1.
On the Profile Manager tab, click Import Profile. The Open dialog box appears.
2.
Select the profile set that you want to import.
certificate to the client. After validating the server's certificate, the
client presents a client certificate to the server for validation.
PEAP - PEAP is similar and easier than TLS in that they specify a
stand-alone authentication protocol be used within an encrypted
tunnel.
LEAP - LEAP is a pre-EAP, Cisco-proprietary protocol, with many of
the features of EAP protocols. Cisco controls the ability of other
vendors to implement this protocol, so it should be selected for use
only when limited vendor choice for client, access-point, and server
products is not a concern. When you have set up LEAP
authentication, you have to enter the user name and password of
your computer.
For WPA Radius and WAP2 Radius modes, click this button to open
a sub-windows where you can enter details of this Radius server.
20
User Manual
Advertisement
Table of Contents
