Table of Contents
Advertisement
User's Guide
Chapter 1 - Getting Started
Before using the Sonocaddie V300 for the first time, charge the battery for at least 4 hours. Under
normal conditions, a full battery charge may take up to 4 hours if the device is turned off, and
longer if it is turned on for use. To charge the V300, remove the back cover and insert the supplied
rechargeable battery correctly as shown.
Warning: We recommend that you never charge the device over 8 hours.
Locate the charging/data port on the bottom of the V300, pull out the rubber cover, and carefully
insert the mini-end of the supplied USB cable into the port. Connect the other end of the cable to the
USB port on your computer. (Fig. 1, 2, 3)The screen indicates that the device is charging and also
when it has reached a full charge. You can also charge the device with the supplied AC Wall
Charger Adapter or an optional 12V Car Adapter (Fig. 4).
The battery should last approximately 12 hours under normal operation. Please note that using
longer "Backlight" durations in the Settings will drain the battery quicker. You can confirm the
remaining battery level with the V300 on-screen battery gauge.
(Fig. 1, 2, 3)
(Fig. 4)
Scale of power
No battery ＊
Full
Empty
Conditions
* Indicates a problem: (1) No battery in the device. (2) Battery is not inserted correctly. (3) Battery is defective.
Chapter 2 – Introduction
The Sonocaddie V300 has many unique and useful features to help you earn your best scores ever
as shown below. The Course Layout is a patented 3-D color view of each hole that allows you to
see your exact position on every hole in real time and the precise distances to critical targets. The
This document is the property of Sonostar Inc. Any unauthorized reproduction is prohibited
Page 6
Hide quick links:
Advertisement
Table of Contents
