Create A New Course; Name The New Course; Map The Targets On The New Course - Sonocaddie V300 User Manual

User's Guide

7.3 Create a New Course

Creating a new course map works just like the edit process in Chapter 6.2, except the Edit Screen is
blank when you start. By following the steps below, you can create your own custom layout for any
hole on a new course. You can only view a new course using the "Hole-Info" screen and you must
be on the course to map the targets.

7.3.1 Name the New Course

The Sonocaddie V300 allows you to map a new course if it's not in the Sonocaddie database. To
create a new course, select "MAP NEW" from the "MAIN" screen, or press "MORE" with the right
soft key and select "NEW" from the pop-up list to view the keyboard screen. Enter a new course
name using the 5-way key to scroll the keyboard and center key to enter a selection. The backspace
key ( ) on the keyboard erases letters. When you are finished, press "RECORD" to save the name.
After you save the new course name, the "Select Hole" screen immediately appears. The new
course name also automatically appears on your course list.
OR

7.3.2 Map the Targets on the New Course

Mapping a new course with the Sonocaddie V300 is easy. Simply repeat the following steps each
time you want to add a target to a hole for a new course.
Step 1: Press "SELECT" with the right soft key for the hole you are mapping and then select
"EDIT."
This document is the property of Sonostar Inc. Any unauthorized reproduction is prohibited
Page 22