Sonocaddie V5000 Quick Start Manual

. . To use your V500 first time, you must have a V500 member
V500 Quick Start Guide V 5,0.03_E account. Simply register a membership at
www.sonocaddie.com/V500/member.html and select "Register."
V500 Introduction Follow the instructions to complete the registration.
Important! Sonostar in.
MODEL: V500
You need the Serial Number (S/N) of your s Teste 1o comply win
V500 to register your member. It is located = EA 'am
on the back of the V500 under the battery.
. Install V500 Driver
Install the V500 Driver from CD included or V500 website at
http://www.sonocaddie. com/V500/Support. html if you do not
have CD-ROM device. Baos T isaac
Note: The Driver is for connecting 1B Sonocodite >
your V500 and computer only. 8 oes pore ;
Please check V500 driver from
program files after completing the
installation. Fan 50 |
. Login your Member Information in V500
After completing the installation, please turn on V500 and connect
the USB cable between V500 and computer (Please note that
internet connection is required.), and then login your member
information to start.
GOLF GPS (Note: The login process
must be done using the
touch screen keyboard in
the V500. HINT: A golf ManeerLooin
tee will work well on the h
DEMO
screen keyboard.) / | earn
GOiFGPS:
1. Power open / off Button
2, Screen Lock Button 4. Calibrate V500 Touch Screen
= USE Cable & Charging Port The first time you use your Sonocaddie V500, please go to
4. Satellite Signal "Settings" in the Main Menu and select "Touch Calibration" to
5. Right / Left Soft Key (Hole Selection Key) calibrate V500 Touch Screen.
Cancel Login