Eject The Memory Card; Write Text; Traditional Text Input - Nokia E51 User Manual

E series
Hide thumbs Also See for E51:
Table of Contents

Advertisement

Available languages

Available languages

data on the memory card is not protected against
unauthorised use.
To open a locked memory card, select
memory
card. Enter the password.

Eject the memory card

Important: Do not remove the memory card in the
middle of an operation when the card is being accessed.
Removing the card in the middle of an operation may damage
the memory card as well as the device, and data stored on
the card may be corrupted.
1. Press the power key briefly, and select
card.
2. Press the release button and slide off the back cover.
3. Press the end of the memory card to release it from the
memory card slot.
4. Close the back cover.

Write text

The input methods provided in the device may vary according
to different sales markets.

Traditional text input

is shown on the top right of the display when you are
writing text using traditional text input.
© 2007 Nokia. All rights reserved.
Options
Unlock
>
Remove memory
and
indicate the selected case.
that the first letter of the sentence is written in uppercase
and all the other letters are automatically written in
lowercase.
indicates the number mode.
To write text with the keypad, press a number key 2-9
repeatedly until the desired character appears. There are
more characters available for a number key than are printed
on the key. If the next letter is located on the same key as the
present one, wait until the cursor appears, and enter the
letter.
To insert a number, press and hold the number key.
To switch between the upper and lower case mode and the
number mode, press #.
To erase a character, press the backspace key. Press and hold
the backspace key to erase more than one character.
To access the most common punctuation marks, press the 1
key. Press 1 repeatedly to reach the desired punctuation
mark.
To add special characters, press *. Scroll to the desired
character and press the scroll key.
To insert a space, press 0. To move the cursor to the next line,
press 0 three times.
To switch between the different character cases, press #.
Your Nokia E51
indicates
31

Hide quick links:

Advertisement

Chapters

Table of Contents
loading

Table of Contents