Call Settings; Network Settings; Connection Settings - Nokia E51 User Manual

Call settings

To display your phone number to the person you are calling,
select Call Send my caller ID
>
determine whether your caller ID is sent, select
network.
To display your net call address to the person you are calling
using a net call, select Call
Yes.
To be notified of a new incoming call while you have a call in
progress, select Call Call waiting
>
Activate. To check if the function is active on the network,
select Options Check
>
To select whether net calls alert or not, select
call alert. You are notified of missed net calls with a
notification.
To set the default call type, select
and select Voice call if you make a GSM calls, or
call if you make net calls.
To send a text message automatically to the person who is
calling you informing why you cannot answer the incoming
call, select Call Reject call with SMS
>
for the message, select Call

Network settings

Select Menu Tools
> >
© 2007 Nokia. All rights reserved.
> Yes. To let the network
Set by
Send my internet call ID
>
Options
>
status.
Call
>
Call Default call type
>
Internet
> Yes. To set the text
Message text.
>
Settings Phone > Network.
>
To select the network mode, select
mode, UMTS, or GSM. In the dual mode, the device switches
automatically between networks.
Tip:
increase the demand on battery power and reduce the
battery life. In regions close to both GSM and UMTS
networks, selecting
jumping between the two networks, which also
>
increases the demand on battery power.
To select the operator, select
Manual to choose from available networks, or
>
have the device select the network automatically.
To set the device to indicate when it is used in Micro Cellular
Network (MCN), select
Internet

Connection settings

Select Menu
Select from the following:
Bluetooth
•
receive data with Bluetooth", p. 97.
USB — Edit the data cable settings.
•
cable", p. 95.
Access points
•
Some or all access points may be preset for your device by
your service provider, and you may not be able to create,
edit, or remove them.
Network mode
UMTS enables faster data transfer, but may
Dual mode
Operator selection
Cell info display
Tools Settings
> >
— Edit the Bluetooth settings.
— Set up new or edit existing access points.
Settings
and Dual
may cause constant
and
Automatic to
> On.
> Connection.
See "Send and
See "Data
121