GE GFDS350 Technical Service Manual page 15

STEP-BY-STEP INSTRUCTIONS (cont.)
Machine
screws
Tapping
Screws
Reinstall Hinge Assembly
7. Install the hinge assembly in the opposite side of the door as shown. Push the
hinge assembly in place until the hinge holes align with the door holes.
8. Hold the hinge and door on their side with one hand and fasten the 6
machine screws as shown.
Reinstall Hinge Cover
9. Insert the hinge cover. Align the hinge cover holes with the holes in the door.
Hinge
Cover
10. Secure the hinge cover with 2 taping screws.
– 15 –
GEAppliances.com
(Continued Next Page)