H.264 DVR User Manual page 44

Digital Video Recorder User Manual
button to exit the current interface.
To record: tick off recoding channels, it will record the camera when alarm triggered. Click OK button to save the setting; click Exit button to
exit the current interface.
To P.T.Z: set linked preset and cruise for alarm. User can select any channel and multi channels as linked channels. Click OK button to save
the setting; click Exit button to exit the current interface.
Step4: user can setup all channels with same parameters, tick off "all", then to do relevant setup.
Step5: click "default" button to resort default setting; click "apply" button to save the setting; click "exit" button to exit current interface.
③
Schedule
Step1: enter into system configuration alarm configuration sensor schedule; refer to Fig 4-22:
Fig 4-22 sensor-schedule
Step2: the setup steps of sensor schedule are familiar with schedule; user can refer to 4.4.1 Schedule for details.
Note: the default schedule of sensor is full-selected, that is, the color of schedule setting interface is blue.
44