Control With Mouse; Connect Mouse - H.264 DVR User Manual

Item
3 REC Button
4 Digital Button
5 Multi Screen Button
6 SEARCH Button
7 MENU Button
8 ENTER Button
9 Direction Button
10 +/- Button
11 Playback Control Button
12 AUDIO Button
13 Auto Dwell Button
14 BACKUP Button
15 PTZ Control Button
Operation processes with remote controller to control multi-DVR
The device ID of the DVR is 0. When use of remote controller to control single DVR, it's not necessarily to reset the device ID, user can do operation
directly; when control multiple DVR with remote controller, please refer to below steps:
Step1: Activate remote controller to control DVR: enable DVR: turn the IR sensor of the remote controller to the IR receiver that on the front panel,
press the number key 8 twice, then input device ID (Range from: 0-65535; the default device ID is 0.) with other digital number: 0-9, after that, press
ENTER button to confirm.
Step2: User can check the device ID by enter into System configuration Basic configuration device ID. User also can set other DVRs with the
same device ID. For more convenient to operate, we don't recommend user to set the device ID too long.
Step3: Cancel controller to control DVR: turn the IR sensor of the remote controller to the IR receiver that on the front panel, press the number key 8
twice, then input the device ID that needs to be cancelled from controlling, press ENTER button to confirm. After that, the DVR will not be controlled
by remote controller.

2.5 Control with Mouse

2.5.1 Connect Mouse

It supports USB mouse through the ports on the rear panel, please refer to Fig 2.9 Remote Controller.
Notice: If mouse is not detected or doesn't work, check below steps:
1. Make sure the mouse plugs in the USB mouse port not the USB port
Digital Video Recorder User Manual
Name
To record manually
Input digital or choose camera
To choose multi screen display mode
To enter search mode
To enter menu
To confirm the choice or setup
Move cursor in setup or pan/title PTZ
To increase or decrease the value in setup
To control playback, Fast forward/rewind/stop/single frame play
To enable audio output in live mode
To enter auto dwell mode
To enter backup mode
To control PTZ camera:
Move camera/ZOOM/FOCUS/IRIS/SPEED control
Function
18