Front Bezel Buttons And Functions; Pushbutton Operation - Fast Forward Video NDT 200 User Manual

Front Bezel Buttons and Functions

POWER Switch: The green pushbutton is the power button, press and release to start the NDT 200™.
When the unit is "On", pressing the power button for 5 seconds will turn the unit "Off".
PASS-THRU: The LED below the power switch will flash red once per second indicating that it is in
digital pass-thru mode, which indicates the D.V.R. is record ready. The status line of the LCD panel will
also display PASS-THRU at this time.
Function
Start Record
Stop Record
Change to Pass-Thru
Play forward – 1x
Pause
Step Fwd 1 frame
Step Rev 1 frame
Seek to end of loaded
clip
Seek to start of loaded
clip
Scan Fwd – 5x
Scan Fwd – 30x
Scan Rev – 5x
Scan Rev – 30x
Clear Disk
NDT 200™ Manual, Fast Forward Video, Inc.

Pushbutton Operation

Req. State
Any but Record
■
Record
■
Play or Stop
Stop
Play
■
Play or Stop
■
Play or Stop
Play or Stop
Play or Stop
Play ≠ 5x
►
Play = 5x
►
Play ≠ -5x
►
Play = -5x
►
+ +
Any but Record
Keys Notes
REC
Hold Stop and tap Record
+ REC
Hold Stop and tap Record
+ REC
►
■
Hold Stop and tap Fast Fwd
+
Hold Stop and tap Rewind
+
+ Hold Play and tap Fast Fwd
+ Hold Play and tap Fast Fwd
+ Hold Play and tap Rewind
+ Hold Play and tap Rewind
Push and hold
and release all three (LED flashes red and
REC
green quickly), then press and hold
seconds. LED will flash fast red, until last two
seconds of format - it changes to fast green
blink. Returns to slow red blink when ready to
record.
, then
, then press
REC
7
REC
for 5