Panasonic WV-NS954 Installation Manual page 26

Hide thumbs Also See for WV-NS954:
Table of Contents

Advertisement

Step 1
Start the Panasonic IP setting software.
Step 2
Click the [IP setting] button after selecting the MAC
address/IP address of the camera to be configured.
Note:
When using a DHCP server, the IP address
assigned to the camera can be displayed by click-
ing the [Refresh] button of the IP setting software.
26
Step 3
Complete each network setup item and click the
[Apply] button.
Note:
When using a DHCP server, it is possible to set
"DNS" to "AUTO".
Important:
• It may take around 30 seconds to completely
upload the settings of the camera after clicking the
[Apply] button. The settings may be invalidated
when the power supply is cut or when the LAN
cable is disconnected before completing the
upload. In this case, perform the settings again.
• When using a firewall (including software), allow
access to all UDP ports.

Advertisement

Table of Contents
loading

Table of Contents