Heatmaster G100 Operation And Maintenance Manual page 8

G Series Outdoor Furnaces
Installation should be performed by a qualified installer and will comply with all
Max BTU Output
Heat Output (8 Hour Burn)
Furnace Size (W x L x H)
Furnace Weight
Firebox Dimensions (W x L x H)
Chimney Size
Firebox Loading Door Size
Water Capacity
Maintain adequate clearance of buildings and combustibles. Pile and store wood under
shelter. Do not place or store wood within stove installation clearances or within the
space required for charging and ash removal. For indoor installations where fans are
used in the fuel storage area they should be installed so as to not create any negative
pressure in the room where your G SERIES furnace is burning
Contact all governing authorities in your area prior to installation.
When choosing the location of your furnace you should consider prevailing wind direc-
tion, distance from home and wood storage for refueling. Give consideration for any
effect on your neighbors.
Whether installing your G SERIES furnace inside a building or outside the following
clearances to combustibles must always be followed or damage and personal injury
may result:
Furnace Roof to Ceiling (Indoor Installations)
Side Walls
Rear
Front (Loading door)
- 4 -
FURNACE INSTALLATION GUIDE
FURNACE INSTALLATION GUIDE
requirements of the agency having jurisdiction.
Furnace Specifications
120,000 BTU/hr
48,000 BTU/hr
36 x 56 x 74
1300 lbs
18 x 18 x 31
100 gallons
LOCATION
LOCATION
CLEARANCES TO COMBUSTIBLES
CLEARANCES TO COMBUSTIBLES
Minimum Clearance to Combustibles
G100
232,000 BTU/hr
111,500 BTU/hr
48 x 72 x 79
2400 lbs
28 x 29 x 34
6"
195 gallons
G200
350,000 BTU/hr
180,500 BTU/hr
51 x 84 x 86
3000 lbs
28 x 40 x 39
6"
250 gallons
6"
6"
6"
24"
www.heatmasterss.com
G400
8"