Scheduled Recording/Viewing Using The Epg; Schedule List - Teac DVS1000HD User Manual

1. Record Device
Select the disk for the record.
2. Format
Format the selected disk.
WARNING: This will erase all data on the disk. Please back up all valuable information before
reformatting a disk.
Note:
· TEAC cannot guarantee compatibility (operation and/or bus power) with all USB storage devices
and holds no responsibility for any loss of data on storage devices that may occur when connected
to this unit.
· It may take longer for the system to read the contents of a USB device if it contains large amounts
of data.
· Some USB devices and external hard drives may not be properly recognised.
· Even when they are in a supported format, some files may not play or display depending on the
content.

Scheduled Recording/Viewing Using the EPG

Automatically record or switch to a specific program at a set time by setting a schedule.
1. Access the EPG by pressing the EPG button on the remote control.
2. Select the desired TV program and press OK.
3. In the pop-up window, you can adjust the channel type, channel number, start and end time, repeat
mode, and Record/View mode if needed.
4. Press OK to confirm the scheduling. The Schedule List will be displayed.
5. Press EXIT to return to watching TV.
Note:
· Ensure that a USB storage device is connected and formatted correctly before recording a
program. Please see PVR Configure instructions above for details.

Schedule List

All scheduled recordings and viewing events are listed in the Schedule List. To view the Schedule
List, press the TIMER LIST button while watching TV. Recording events are marked in orange, and
viewing events are marked in green.
14