Real Time Clock; Keyboard; Internal Display Panel - Toshiba Satellite L50-B User Manual

Problem
Battery doesn't
power the computer
as long as expected

Real Time Clock

Problem
The BIOS setting
and system date/
time are lost.

Keyboard

Keyboard problems can be caused by the setup and configuration of the
computer - please refer to the
Problem
Output to screen is
garbled

Internal display panel

Apparent computer's display panel problems may be related to the
computer's setup and configuration.
User's Manual
Procedure
If you frequently recharge a partially charged
battery, the battery might not charge to its full
potential - in these instances you should fully
discharge the battery and then attempt to charge it
again.
Check the Power saver option under Select a
power plan in the Power Options.
Procedure
The lasting time of the Real Time Clock (RTC) has
run out - you will need to set the date and time in
the BIOS setup utility by using the following steps:
1. In the Settings charm, click Power and then
select Restart.
2. Hold down the F2 key and then release this
key one second after the computer is power
on - the BIOS setup utility will load.
3. Set the date in the System Date field.
4. Set the time in the System Time field.
5. Press F10 - a confirmation message will be
displayed.
6. Select Yes - the BIOS setup utility will end
and the computer will restart.
The Keyboard
Procedure
Please refer to your software's documentation to
ensure that it is not remapping the keyboard in any
way (remapping involves changing or reassigning
the function of each key).
If you are still unable to use the keyboard, you
should contact TOSHIBA Support.
section for further information.
6-6