Table of Contents
Advertisement
the transmission quality between one client, and another.
Signal Strength: This bar displays the strength of the signal received
from an AP or client.
Noise Level: Displays the background noise level; a lower level indicates
less interference.
HT: High Through-Put / 802.11 n Section
BW: Channel Bandwidth
GI: Guard Interval
MCS: Modulation Coding Scheme
SNR: Signal Noise Rate
Advanced Configuration
The Advanced tab is used to configure Tx burst, WMM, and CCX.
Wireless mode: Currently supports 2.4G wireless only.
Enable Tx BURST: Click the check box will enhance the throughput
Enable TCP Window Size: Enhance the throughput if enable this function.
WMM Enable: Click the check box to enable WMM QoS capability. (XP only)
CCX: Enable this option if the network supports Cisco Compatible
Extensions. (XP only)
Click on the Apply button to save the changes.
30
Advertisement
Table of Contents
