Table of Contents
Advertisement
resolve faint, distant objects.
I
m
a
g
e
O
r
i
e
n
t
a
t
I
m
a
g
e
O
r
i
e
n
t
a
t
The image orientation changes depending on how the eyepiece is inserted into the telescope. When using a star
diagonal with refractors, the image is right-side-up, but reversed from left-to-right (i.e., mirror image). If inserting
the eyepiece directly into the focuser of a refractor (i.e., without the diagonal), the image is upside-down and
reversed from left-to-right (i.e., inverted). However, when using the PowerSeeker refractor and the standard erect
image diagonal, the image is correctly oriented in every aspect.
Newtonian reflectors produce a right-side-up image but the image will appear rotated based on the location of the
eyepiece holder in relation to the ground.
PowerSeeker Newtonian, the image is correctly oriented.
Image orientation as seen with
the unaided eye & using erecting
devices on refractors &
Newtonians
F
o
c
u
s
i
n
g
F
o
c
u
s
i
n
g
To focus your refractor or Newtonian telescope, simply turn the focus knob located directly below the eyepiece
holder (see Figures 2-13, 2-14 and 2-15).
farther than the one you are currently observing. Turning the knob counterclockwise from you allows you to focus
on an object closer than the one you are currently observing.
Note: If you wear corrective lenses (specifically glasses), you may want to remove them when observing with an
eyepiece attached to the telescope. However, when using a camera you should always wear corrective lenses to
ensure the sharpest possible focus. If you have astigmatism, corrective lenses must be worn at all times.
C
a
l
c
u
l
a
t
i
n
g
M
a
C
a
l
c
u
l
a
t
i
n
g
M
a
You can change the power of your telescope just by changing the eyepiece (ocular). To determine the
magnification of your telescope, simply divide the focal length of the telescope by the focal length of the eyepiece
used. In equation format, the formula looks like this:
Magnification =
Let's say, for example, you are using the 20mm eyepiece that came with your telescope. To determine the
magnification you divide the focal length of your telescope (the PowerSeeker 60AZ for this example has a focal
length of 700mm) by the focal length of the eyepiece, 20mm. Dividing 700 by 20 yields a magnification of 35x.
Although the power is variable, each instrument under average skies has a limit to the highest useful magnification.
The general rule is that 60 power can be used for every inch of aperture. For example, the PowerSeeker 60AZ is
2.4" inches in diameter. Multiplying 2.4 by 60 gives a maximum useful magnification of 144 power. Although this
is the maximum useful magnification, most observing is done in the range of 20 to 35 power for every inch of
i
o
n
i
o
n
However, by using the erect image eyepiece supplied with the
Reversed from left to right, as
viewed using a Star Diagonal on
Turning the knob clockwise allows you to focus on an object that is
g
n
i
f
i
c
a
t
i
o
n
g
n
i
f
i
c
a
t
i
o
n
Focal Length of Telescope (mm)
Focal Length of Eyepiece (mm)
a refractor
Figure 3-3
12
Inverted image, normal with
Newtonians & as viewed with
eyepiece directly in a refractor
Hide quick links:
Advertisement
Table of Contents
