EarthQuake 6015V Original Operating Instructions page 19

PROBLEM
Belts squeal in neutral
Excessive heat build up in transmission/tine area
during tilling
800-345-6007
REMEdY/ACTION
• Adjust forward belt guide:
- turn engine off and allow muffler to cool
- disconnect spark plug wire and secure from spark plug
- remove belt guard
- pull down on drive safety control lever
- manually bend forward belt guide so there is 1/16 inch
or less clearance between belt guide and belt
- replace belt guard and spark plug wire
• Remove vegetation by following instructions in Clean
Tine Axle Shaft of Normal Care section.
FoLLoW ALL SAFETY INSTRUCTIoNS
• Check transmission fluid and fill if needed
GetEarthquake.com
OPERATOR INSTRUCTIONS ANd PARTS
CRT Models 6015V, 6015VCE, 6015BCE
Page 19