EarthQuake 6015V Original Operating Instructions page 11

WhEEL LOCk PINS
Place wheels in tilling position.
1. Remove lock pin. Align hole in axle with hole in wheel hub. (SEE FIGURE
2)
2. Insert lock pin through holes, fold lock pin ring to secure pin to axle.
3. Firmly lock wheel and axle together before tilling.
4. Repeat for other wheel.
note: always have both wheel lock pins in or out. do not operate
tiller with only one wheel locked.
To place wheels in free-wheel position.
1. Remove lock pin. Slide wheel inward toward machine.
2. Insert pin in axle only.
3. Wheel should turn freely on axle.
800-345-6007
!
WARNING
NEvER START ENGINE OR OPERATE TILLER WITh
WhEELS IN FREE-WhEEL POSITION. ThE FREE-WhEEL
POSITION IS FOR TRANSPORTING ThE TILLER LONG
dISTANCES OvER LEvEL GROUNd-dO NOT ATTEMPT
TO MOvE ThE TILLER UP OR dOWN STEEP GRAdES IN
ThE FREE-WhEEL POSITION.
GetEarthquake.com
OPERATOR INSTRUCTIONS ANd PARTS
CRT Models 6015V, 6015VCE, 6015BCE
Wheel lock pin in free-wheel position.
(axle hole only)
FIGURE 2
Page 11