EarthQuake 6015V Original Operating Instructions page 15

ChANGE FORWARd/REvERSE BELT
1. Turn off engine. Engine must be cool.
2. Remove spark plug wire and secure from spark plug.
3. Remove belt guard. (SEE FIGURE 6)
• remove the forward belt from the forward engine pulley:
- gently pull the engine recoil rope to rotate the pulley.
- with the pulley turning, force the forward belt out of the
V-groove.
- slide the belt free of the engine pulley.
- pull the forward belt down and out of the way.
• install new forward belt:
- place forward belt in transmission pulley groove.
- gently pull the engine recoil rope to rotate the pulley while
forcing the forward belt into the V-groove.
4. Re-attach belt guard.
5. Attach spark plug wire.
800-345-6007
FIGURE 6
GetEarthquake.com
OPERATOR INSTRUCTIONS ANd PARTS
CRT Models 6015V, 6015VCE, 6015BCE
!
CAUTION
dO NOT OPERATE TILLER BEFORE REAdING ThE EN-
GINE MANUAL PROvIdEd IN ThE PARTS PACkET.
!
WARNING
TEMPERATURE OF MUFFLER ANd NEAR BY AREAS MAY
ExCEEd 150° F. AvOId ThESE AREAS.
IMPORTANT
ENGINE CAN OvERhEAT ANd BECOME dAMAGEd IF
dEBRIS BLOCkS ThE COOLING SYSTEM OR ROTATING
SCREEN.
NEvER RUN ENGINE WIThOUT COMPLETE AIR
CLEANER INSTALLEd ON ENGINE.
engine pulley
forward belt
transmission pulley
BELT REPLACEMENT PART #'S:
31315 (forward belt)
Page 15