Dodge Dart 2013 Owner's Manual page 398

Hide thumbs Also See for Dart 2013:

Table of Contents

396 STARTING AND OPERATING

Instrument Cluster Messages

Messages will be displayed in the instrument cluster to

alert the driver when certain unusual conditions occur.

These messages are described below.

GEAR NOT AVAILABLE

SHIFT NOT ALLOWED

SHIFT TO NEUTRAL – THEN D or R

In AutoStick mode, the gear selected by the driver is not

available due to a fault condition. See your authorized

dealer for diagnosis and service.

The gear position requested by the driver is currently

blocked. This occurs if NEUTRAL is requested while moving

(with the throttle opened), if REVERSE is requested while

moving (at 6 mph [10 km/h] or faster), if DRIVE is re-

quested while moving backwards (at 6 mph [10 km/h] or

faster), or if 3rd gear or higher is requested at a stop. Make

sure the vehicle is stopped before engaging DRIVE or RE-

The transmission has shifted itself into NEUTRAL (due to a

fault condition, or overheat due to excessive idling when

stopped in DRIVE with the brakes released), but the shift

Chapters

Table of Contents