Dodge Dart 2013 Owner's Manual page 134

132 UNDERSTANDING THE FEATURES OF YOUR VEHICLE
When calling a number with your Uconnect Phone that
normally requires you to enter in a touch-tone sequence
on your mobile phone keypad, you can press the
button and say the sequence you wish to enter, followed
by the word "Send". For example, if required to enter
your PIN followed with a pound, (3 7 4 6 #), you can
press the button and say, "3 7 4 6 # Send". Saying
a number, or sequence of numbers, followed by "Send",
is also to be used for navigating through an automated
customer service center menu structure, and to leave a
number on a pager.
You can also send stored Uconnect phonebook entries as
tones for fast and easy access to voice mail and pager
entries. To use this feature, dial the number you wish to
call and then press the
system will prompt you to say the "number." If you wish
to send the name say "Send Name" followed by a valid
name from the phonebook. Uconnect Phone will then
button and say, "Send." The
send the corresponding phone number associated with
the phonebook entry, as tones over the phone.
NOTE:
• You may not hear all of the tones due to mobile phone
network configurations. This is normal.
• Some paging and voice mail systems have system time
out settings that are too short and may not allow the
use of this feature.
Barge In — Overriding Prompts
The "Voice Command" button can be used when you
wish to skip part of a prompt and issue your voice
command immediately. For example, if a prompt is
asking "Would you like to pair a phone, clear a...," you
could press the button and say, "Pair a Phone" to
select that option without having to listen to the rest of
the voice prompt.