Reading Documents; Connecting To Your Computer - Sony DPT-S1 User Manual

Digital paper system
Hide thumbs Also See for DPT-S1:
Table of Contents

Advertisement

Cannot find the access point in the Wi-Fi networks
list.
 The access point you want to use is set to not
broadcast its SSID to users. In this case, the access
point may not be shown on the Wi-Fi network list.
Tap [Add Wi-Fi Network] and enter the SSID
manually (page 42).
Network drive
Cannot find the destination.
 Check the network connection (page 57).
 There is a problem with the Destination folder (path
on the server) or network drive. Check with the
network administrator.
 When selecting [Reply], the Digital Paper device
identifies the sender by the file name automatically.
Check that the destination name is in the
Destination folder list (page 45).
Browser
A Web page is not displayed properly.
 The Wi-Fi network connection may have been
interrupted. Make sure that Wi-Fi is turned on and
set up correctly, check the signal strength of the
access point, then refresh the Web page.
 Due to the vast range of standards and
technologies used to design Web pages, it is not
possible to guarantee that all pages will be
displayed correctly.
 When you pinch in/out to zoom in/out a Web page,
the screen may be too bright to read. This is not a
malfunction.

Reading Documents

Cannot open a document.
 The document may be an unsupported file type. For
details on supported file types, see page 66.
[Return to Viewer] does not work, or the page flag is
missing.
 If the file status has changed (such as in the case
below), data under [Return to Viewer] or notes may
be deleted.
A PDF file is edited.
Cannot find content on the Digital Paper device.
 If you have formatted the device on your computer,
the device may not be able to display transferred
content. In this case, use the device's [Format
Memory] function to reformat the device (page 54).
 If you delete or modify folders or files in the
"database" folder on your computer, content or
notes may be deleted.
Cannot annotate a document.
 When a document is protected or opened as read-
only, annotating/editing/saving/deleting cannot
be done.
 The document is opened as read-only. This is
indicated by the tab.
The file is read-only.
There may not be enough space in the internal
memory or microSD card.
The remaining battery charge is too low.
Cannot open sticky notes by the stylus.
 To open a sticky note, tap it with a finger, with the
stylus while pushing the button, or tap the sticky
note in the toolbox.

Connecting to Your Computer

The computer does not detect the Digital Paper
device.
 It may take a while for the computer to detect the
device.
 Make sure that the device is connected directly to
the USB port with the supplied USB cable. Do not
use a USB hub.
 Try connecting to a different USB port on the
computer.
 Try disconnecting the device and connecting it
again.
 If none of the above solves the problem, reset the
device (page 55).
Cannot transfer content to the Digital Paper device.
 There may not be enough space on the device or
the memory card. Check [About] for the amount of
free space on internal memory (page 54). Delete
some content, or copy it to your computer to make
some space on the device or memory card.
58

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents