Gira 0334 Series Operating Instructions Manual page 18

Calibrating display of inside temperature
Depending on the installation site of the radio weather station, the
displayed inside temperature may deviate from the actual room
temperature.
The display of the inside temperature can be adjusted by +/- 10° in
1° increments:
1. Press Mode until ▼ is found in the temperature/humidity area.
2. Select the display of the inside temperature with Ch.
3. Press and hold Set until the temperature display flashes.
✓ The current measured temperature - 10° is displayed.
4. The temperature display is increased by 1° with Set.
5. Confirm the set temperature with Mode.
Selecting temperature display unit
The temperature can be displayed in °C or °F.
1. Select desired unit with the slider switch (°C/°F) on the back of
the radio weather station.
Comfort display
COM
%RH
Zone
DRY
COM
WET
18
In addition to the display of the humidity
in %, so-called "comfort zones" are
displayed, for which the following
conditions apply:
Temperature
any
20 - 25 °C (68 - 77 °F)
any
Humidity
< 40%
40 - 70%
> 70%