Removing The Radio Weather Station - Gira 0334 Series Operating Instructions Manual

Box mounting
1. Connect power adapter to 230 V (see Page 13).
2. Place mounting plate and cover frame on the
flush-mounted box.
3. Secure mounting plate to the support ring of the
flush-mounted box with two screws.
4. Connect plug terminal and attach to the contact
of the radio weather station.
5. Attach weather station to the mounting plate
and snap it in.

Removing the radio weather station

To open the radio weather station:
1. Carefully push lower snap clip
of the radio weather station
upward with a screwdriver.
2. Remove the weather station
from the mounting plate at the
same time.
Hr
hPa
mb
Set
Mode Memo Ch
11