Floor Bracket Kit; Rear Heatshield; Bottom Heatshield; Stove-Top Thermometer - Jøtul F 500 USA Installation And Operating Instructions Manual

Fireplace
Table of Contents

Advertisement

USA/cAnAdA

8.4 Rear Heatshield 154332

A stove rear heatshield has been specifically designed for the Jøtul
F 500 to reduce clearances off the rear of the stove to combustible
materials. Use of the heatshield does not affect the clearance off
the sides of the appliance.
See pages 17-18 for specific clearance requirements. Complete
installation instructions are supplied with the heatshield. No
other type of heatshield may be used on the rear of the Jøtul
F 500.

8.5 Bottom Heatshield 154330

A bottom heatshield has been specifically designed for the Jøtul
F 500 and is included with your stove. It is required in all alcove
installations. Use of the bottom heatshield does not affect the
floor protection requirements discribed on page 7 of this manual.
No other type of heatshield may be used on the bottom of the
Jøtul F 500.

8.6 Stove-top Thermometer 5002

Jøtul recommends the use of a magnetic stove-top thermometer
to monitor the surface temperature of the stove. The optimum
surface temperature range for the most efficient, clean burn is
between 400° and 600°.
8.7 Side Door Lock Kit 155850
The side load door must be locked to permit installation of the
F 500 in a corner or alcove constructed of combustible materials.
8.8 Leg Leveler Kit 156096
8.9 Replacement Door Knob Kit 155991
8.10 Replacement Gasket Kit 157050
13

Advertisement

Table of Contents
loading

This manual is also suitable for:

F 500

Table of Contents