Battery Installation & Information
Installation
• An adult must install batteries. Tool needed for battery installation: Phillips screwdriver (not included).
Requires four LR6 alkaline batteries for operation (batteries not included).
• Locate the battery compartment on the back of the unit.
• Loosen the screw in the battery compartment door with a Phillips screwdriver. Lift to remove the battery
compartment door.
• Insert four LR6 alkaline batteries.
• Replace the battery compartment door and tighten the screw with a Phillips screwdriver.
Do not over-tighten.
• Always use alkaline batteries for longer battery life.
• Be sure the reset switch is in the On position.
Battery Compartment
11
1.5V x 4
LR6
SHOWN ACTUAL SIZE
Back View
Reset Switch