Hood Release - Hyundai Tucson Owner's Manual

HOOD RELEASE

B570A03A-GAT
HJM2020
1. Pull the release knob to unlatch the hood.
jmhma-1a.p65 77
2. Push the secondary latch lever to the left and
lift the hood.
3. Hold the hood open with the support rod.
HJM2021
FEATURES OF YOUR HYUNDAI
Before closing the hood, return the support rod
to its clip to prevent it from rattling. Lower the
hood until it is about 1 ft. (30 cm) above the
closed position and let it drop. Make sure that it
locks into place.
!
CAUTION:
Make sure that the support rod has been
released prior to closing the hood.
!
WARNING:
HJM2022
o Always double check to be sure that the
hood is firmly latched before driving
away. If it is not latched, the hood could
open while the vehicle is being driven,
causing a total loss of visibility, which
might result in an accident.
o The support rod must be inserted com-
pletely into the hole provided in the
hood whenever you inspect the engine
compartment. This will prevent the hood
from falling and possibly injuring you.
o Do not move the vehicle with the hood
in the raised position, as vision is ob-
structed and the hood could fall or be
damaged.
HJM2023
9/24/04, 10:09 AM
1
77