Summary of Contents for AEI Security & Communications DG258 igiSender HQ2
Page 1
Model: DG258 Twin Input 5.8GHz Wireless AV Sender System WATCH A VIDEO WATCH A VIDEO INSTALLATION INSTALLATION & TROUBLESHOOTING GUIDE & TROUBLESHOOTING GUIDE Available online at: www.aei.eu/video Available online at: www.aei.eu/video...
DG258 - DigiSender HQ2 - Twin Input 5.8GHz Wireless AV Sender System Introduction Congratulations on purchasing the DigiSender® HQ2 - Twin Input 5.8GHz Wireless AV Sender Sys- tem. This product represents state of the art wireless audio and video technology and the most advanced Infra-Red relay technology at exceptional value for money.
DG258 - DigiSender HQ2 - Twin Input 5.8GHz Wireless AV Sender System Installing your DigiSender® Step 1 - Unpack your DigiSender® All DigiSender® orders are computer weight checked when packed. However, it is a good idea to check all kit contents are present before proceeding with the installation. DigiSender®...
DG258 - DigiSender HQ2 - Twin Input 5.8GHz Wireless AV Sender System Installing your DigiSender® Step 2 - Install the Transmitter The Transmitter will send the audio and video from two connected sources (your Satellite receiver and DVD Player for example) to the Receiver, located in another room in your home. Connect DigiConnector™...
Page 6
DG258 - DigiSender HQ2 - Twin Input 5.8GHz Wireless AV Sender System Installing your DigiSender® continued... Note: Try to avoid positioning the Transmitter directly on top of other electrical devices as this could lead to a poor picture. Connect the Power Supply Unit (PSU) to the socket Connect the Power Supply Unit (PSU) to an avail- labelled ‘PSU’...
DG258 - DigiSender HQ2 - Twin Input 5.8GHz Wireless AV Sender System Installing your DigiSender® Step 3 - Install the IR Systeme Technik Remote Relay Kit™ Once set up correctly, the IR Systeme Technik™ Remote Relay Kit will enable you to control your source equipment from the receiving location in your home.
DG258 - DigiSender HQ2 - Twin Input 5.8GHz Wireless AV Sender System Installing your DigiSender® Step 4 - Install the Receiver The Receiver will pick up the signals being sent by your Transmitter and output them to a connected Locate a vacant SCART socket on the back of your Ensure that the Audio/Video and Remote Relay receiving TV and insert the DigiSender®...
DG258 - DigiSender HQ2 - Twin Input 5.8GHz Wireless AV Sender System Using your DigiSender® Standard Operation The steps below should be followed every time you use the DigiSender®. Turn on the Transmitter and Receiver by pushing the Power button on the front of the units. The Switch on the source equipment (Satellite, Free- Power button will light up blue to indicate the unit view, DVD, VCR, etc.).
DG258 - DigiSender HQ2 - Twin Input 5.8GHz Wireless AV Sender System Using your DigiSender® Basic Functions Turning the DigiSender® On and Off To turn the DigiSender® On, press the power button on the front of the Transmitter and Receiver. The power button will light up blue to indicate that the unit is switched on.
DG258 - DigiSender HQ2 - Twin Input 5.8GHz Wireless AV Sender System Using your DigiSender® Advanced Functions Changing the Audio/Video Channel The DigiSender® HQ2 features 4 Audio/Video Channels. Each of these Audio/Video Channels slightly changes the frequency on which the DigiSender® HQ2 operates. Because the Audio/Video Channel switch allows you to ‘fine tune’...
DG258 - DigiSender HQ2 - Twin Input 5.8GHz Wireless AV Sender System Using your DigiSender® The DigiSender® Remote Control 1. POWER The POWER button will turn your DigiSender® Transmitter or POWER Receiver On or Off. 2. Input 1 The Input 1 button will select Input 1 on the Transmitter Input 1 and Receiver.
DG258 - DigiSender HQ2 - Twin Input 5.8GHz Wireless AV Sender System Troubleshooting Audio Problems 1. Disconnect both the Trans- mitter AND Receiver SCART cables. Reconnect the cables ensuring they are pushed into I can see the picture but can’t the sockets firmly.
DG258 - DigiSender HQ2 - Twin Input 5.8GHz Wireless AV Sender System Troubleshooting Video Problems What do you see on the second TV? The picture is present but I see a black screen... poor quality... Switch OFF your DigiSender® TRANSMITTER. POOR RANGE What do you now see on the second TV? 1.
Page 15
DG258 - DigiSender HQ2 - Twin Input 5.8GHz Wireless AV Sender System Troubleshooting Video Problems What do you see on the second TV? I see a snowstorm or blue I see lines over the picture... screen... Switch OFF your DigiSender® RECEIVER. INTERFERENCE What do you now see on the second TV? This indicates one or more...
DG258 - DigiSender HQ2 - Twin Input 5.8GHz Wireless AV Sender System Troubleshooting Remote Relay Problems If you have any difficulty operating your source equipment remote control in your second room please follow the advice below below: 1. Ensure the IR Emitter is connected to the socket labelled ‘IR’ on the Transmitter. 2.
DG258 - DigiSender HQ2 - Twin Input 5.8GHz Wireless AV Sender System Troubleshooting Technical Support & Accessories Technical Support AEI Security & Communications Ltd is dedicated to providing our customers with first class customer care and technical support. 1. Website www.aei.eu Free technical advice is available online 24/7 at our dedicated support web site: 2.
Page 18
DG258 - DigiSender HQ2 - Twin Input 5.8GHz Wireless AV Sender System Notes Page 18 Please read the instructions carefully prior to installation...
Page 19
D E CL AR AT IO N OF CO NFO R MIT Y 01022007/01/DG-DV-DX AEI Security & Communications Ltd. Weslake Industrial Park, Harbour Road, Rye, East Sussex, TN31 7TE, United Kingdom declare under our sole responsibility that the products bearing the series code prefi xed: DGx, DVx, DXx (x refers to the specifi...
Page 20
SPECIFICATIONS Audio/Video Frequency 5.7250GHz ~ 5.8750GHz Remote Relay Receiver 433.92MHz Modulation Sensitivity -90dBm Video Input/Output Level 1V PP/75Ω Colour Video Input Phase Alternate Line (PAL) Audio Input/Output Level 1.0v PP (Mod 1KHz, Dev 15KHz) Audio Bandwidth 10Hz - 22KHz (-1dB) Input Connectors 2x DigiConnector™...