Additional receiver for the dg158, dg258 & dg258-2rx (4 pages)
Summary of Contents for AEI Security & Communications DigiSender ZX7
Page 1
121009-1 DigiSender ZX7 MODEL: DG458 ® 5.8GHz Quad Input Wireless AV Sender WATCH A VIDEO WATCH A VIDEO INSTALLATION INSTALLATION & TROUBLESHOOTING GUIDE & TROUBLESHOOTING GUIDE Available online at: www.aei.eu/video Available online at: www.aei.eu/video PLEASE KEEP THIS INSTRUCTION MANUAL FOR FUTURE REFERENCE...
DG458 - DigiSender® ZX7 - 5.8GHz Quad Input Wireless AV Sender Introduction Congratulations on purchasing the DigiSender® ZX7 - Quad Input 5.8GHz Wireless AV Sender. This product represents state of the art wireless audio and video technology and the most advanced Infra-Red relay technology at exceptional value for money.
DG458 - DigiSender® ZX7 - 5.8GHz Quad Input Wireless AV Sender STEP 1 - Unpack your DigiSender® ZX7 All DigiSender® orders are computer weight checked when packed. However, it is a good idea to check all kit contents are present before proceeding with the installation. Remote Control IR Systeme Technik™...
DG458 - DigiSender® ZX7 - 5.8GHz Quad Input Wireless AV Sender STEP 2 - Install the DigiSender® ZX7 Transmitter The Transmitter will send the audio and video from up to four connected sources (your Satellite and DVD Player for example) to the Receiver, located in another room in your home. Connect DigiConnector™...
Page 6
DG458 - DigiSender® ZX7 - 5.8GHz Quad Input Wireless AV Sender continued... Note: Try to avoid positioning the Transmitter directly on top of other electrical devices as this could lead to a poor picture. Connect the Power Supply Unit (PSU) to the Connect the Power Supply Unit (PSU) to an socket labelled ‘PSU’...
DG458 - DigiSender® ZX7 - 5.8GHz Quad Input Wireless AV Sender STEP 3 - Install the IR Systeme Technik™ Once set up correctly, the IR Systeme Technik™ will enable you to control your source equipment from the receiving location in your home. Because everyone’s set up is different there are many ways you can install the IR Systeme Technik™...
DG458 - DigiSender® ZX7 - 5.8GHz Quad Input Wireless AV Sender STEP 4 - Install the DigiSender® ZX7 Receiver The Receiver will pick up the signals being sent by your Transmitter and output them to a connect- ed TV. Locate a vacant SCART socket on the back of Ensure that the Audio/Video and Remote Relay your receiving TV and insert the DigiSender®...
DG458 - DigiSender® ZX7 - 5.8GHz Quad Input Wireless AV Sender STEP 5 - Using the DigiSender® ZX7 POWER Turn on the Transmitter and Receiver by pushing Switch on the source equipment (Satellite, the Power button on the front of the units. The Freeview, DVD, VCR, etc.).
DG458 - DigiSender® ZX7 - 5.8GHz Quad Input Wireless AV Sender Using the DigiSender® ZX7 The DigiSender® Remote Control 1. POWER The POWER button will turn your DigiSender® ZX7 Transmitter or Receiver On or Off. POWER 2. Input 1 Input 1 The Input 1 button will select Input 1 on the DigiConnector™...
DG458 - DigiSender® ZX7 - 5.8GHz Quad Input Wireless AV Sender Using the DigiSender® ZX7 Basic Functions Turning the DigiSender® ZX7 On and Off To turn the DigiSender® ZX7 On, press the power button on the front of the Transmitter and Receiver. The red standby LED will light up green to indicate that the unit is switched on.
DG458 - DigiSender® ZX7 - 5.8GHz Quad Input Wireless AV Sender Using the DigiSender® ZX7 Advanced Functions Changing the Audio/Video Channel The DigiSender® ZX7 features 4 Audio/Video Channels. Each of these Audio/Video Channels slight- ly changes the frequency on which the DigiSender® ZX7 operates. Because the Audio/Video Channel switch allows you to ‘fine tune’...
DG458 - DigiSender® ZX7 - 5.8GHz Quad Input Wireless AV Sender Upgrades & Accessories Additional Receiver - DG45RX Aerial Convertor - MOD01PIS • Get your Satellite channels to additional • Connect a DigiSender® Receiver to an TV’s in your home! aerial socket on your TV •...
DG458 - DigiSender® ZX7 - 5.8GHz Quad Input Wireless AV Sender Troubleshooting Picture Problems Q: What do you see on your second television? The picture is present but I see a black or blank screen poor quality POOR RANGE Switch OFF your DigiSender® TRANSMITTER What do you now see at the second TV? 1.
Page 15
DG458 - DigiSender® ZX7 - 5.8GHz Quad Input Wireless AV Sender cont... I see a snowstorm effect or I see lines over the picture plain blue screen INTERFERENCE Switch OFF your DigiSender® RECEIVER. Q: What do you now see at the second TV? This indicates one or more elec- trical devices are interfering with the DigiSender®.
DG458 - DigiSender® ZX7 - 5.8GHz Quad Input Wireless AV Sender Troubleshooting Audio Problems 1. Disconnect both the Transmitter AND Receiver SCART cables. Reconnect the cables ensuring they are pushed into the sockets firmly. I can see the picture but 2.
DG458 - DigiSender® ZX7 - 5.8GHz Quad Input Wireless AV Sender Troubleshooting Problems Controlling the Source Equipment If you have any difficulty operating your source equipment remote control in your second room please follow the advice below below: 1) Ensure the IR Emitter is connected to the socket labelled ‘IR’ on the Transmitter. 2) Ensure you are using the correct remote control in the second room.
DG458 - DigiSender® ZX7 - 5.8GHz Quad Input Wireless AV Sender Technical Support AEI Security & Communications Ltd is dedicated to providing our customers with first class customer care and technical support. During busy periods we would suggest using the web option to obtain support. 1.
Page 20
SPECIFICATIONS DG458 Transmitter : Remote Relay Receiver 433.92MHz Audio/Video Frequency 5.7250GHz ~ 5.8750GHz Modulation Video Input Level 1V PP/75Ω Colour Video Input Phase Alternate Line (PAL) Audio Input Level 1.0v PP (Mod 1KHz, Dev 15KHz) Audio Bandwidth 20Hz - 20KHz (-3dB) Input Connectors 2x DigiConnector™...
Need help?
Do you have a question about the DigiSender ZX7 and is the answer not in the manual?
Questions and answers