11.
Using your left hand, reach behind your back,
grab the right "shoulder strap" and bring it
around to the front on your left side. Fasten the
shoulder strap buckle. You will hear a 'click'
when buckle is secure.
* IMPORTANT! Before releasing your hold on the
baby, ensure that all buckles are securely fastened.
12.
Switch arms and repeat steps 10-11 above to
connect the left "shoulder strap" and secure
the baby in the carrier. When correctly fastened
the straps should criss cross flat against your
back.
* IMPORTANT! Before releasing your hold on the
baby, ensure that all buckles are securely fastened.
13.
To adjust carrier for a comfortable fit, lift the
baby slightly and pull the "shoulder strap ends"
back, first on one strap, then on the other.
* The baby should NEVER be leaning forward in the
carrier.
10.
Removing the Baby from the Carrier: Facing In/Out
* IMPORTANT! Keep at least one hand on the baby until he/she is safely removed from
the carrier.
1.
With one hand securely on your baby, release
the "lower shoulder strap buckle" located on
one side at the bottom of the carrier body,
closest to the baby's leg.
2.
Continuing to hold the baby securely, release
the "lower shoulder strap buckle" on the other
side.
3.
Carefully remove both "shoulder straps".
4.
Remove the carrier from your body and place
the baby (and the carrier) on a safe, level,
non-elevated surface.
5.
Release both of the "shoulder strap/child
restraint buckles" and move them away from
the baby.
6.
Release the printed "chest strap." Unfasten the
two "side closure buckles" or if you prefer, simply
loosen both buckles.
7.
Remove the baby from the carrier.
11.
Need help?
Do you have a question about the Infinity and is the answer not in the manual?
Questions and answers