Setting The Clock; Changing The Display Mode; Disc/Usb Playback; Playing A Disc - Sony SHAKE-99 Operating Instructions Manual

Setting the clock

You cannot set the clock in Power Saving
Mode.
1
Press "/1 to turn on the system.
2
Press TIMER MENU.
If "PLAY SET" appears in the display
panel, press
"CLOCK SET", then press
3
Press
hour, then press
4
Press
minutes, then press
Changing the display
mode
The demonstration appears in the display
panel once you plug the power cord into a
wall socket.
Press DISPLAY repeatedly while
the system is turned off.
Demonstration
The display changes and the indicator
flashes even when the system is turned
off.
No display (Power Saving Mode)
The display is turned off to conserve
power. The timer and clock continue to
work internally.
Clock
The clock display automatically turns to
Power Saving Mode after a few seconds.
GB
16
/ repeatedly to select
/ repeatedly to set the
.
/ repeatedly to set the
.

Disc/USB Playback

Playing a disc

1
Press CD.
2
Press Z OPEN/CLOSE on the
unit.
3
Load a disc with the label side
.
facing up on the disc tray.
When you play
back an 8 cm
disc such as a
CD single, place
it on the inner
circle of the tray
4
Press Z OPEN/CLOSE on the
unit to close the disc tray.
Do not forcibly push the disc tray to
close it as this may cause a
malfunction.
5
Press N to start playback.