Specifications - Sony SHAKE-99 Operating Instructions Manual

Specifications

AUDIO POWER
SPECIFICATIONS
POWER OUTPUT AND TOTAL
HARMONIC DISTORTION:
(USA model only)
SHAKE-99
With 10 ohm loads, both channels driven,
from 100 – 3,000 Hz; rated 500 watts per
channel minimum RMS power, with no
more than 0.7% total harmonic distortion
from 250 milliwatts to rated output.
SHAKE-55
With 4 ohm loads, both channels driven,
from 120 – 10,000 Hz; rated 180 watts per
channel minimum RMS power, with no
more than 0.7% total harmonic distortion
from 250 milliwatts to rated output.
SHAKE-33
With 4 ohm loads, both channels driven,
from 40 – 600 Hz; rated 180 watts per
channel minimum RMS power, with no
more than 0.7% total harmonic distortion
from 250 milliwatts to rated output.
Amplifier section
The following are measured at
USA and Canadian models:
AC 120 V, 60 Hz
Mexican model:
AC 120 V – 240 V, 60 Hz
European model:
AC 220 V – 240 V, 50/60 Hz
Chilean and Bolivian models:
AC 220 V – 240 V, 50 Hz
Australian model (SHAKE-99 only):
AC 230 V – 240 V, 50/60 Hz
Other models:
AC 120 V – 240 V, 50/60 Hz
SHAKE-99
WF (Woofers)
Power Output (rated):
700 W + 700 W (at 10 ohms, 1 kHz,
1% THD)
GB
44
RMS output power (reference):
900 W + 900 W (per channel at
10 ohms, 1 kHz)
MID (Mid speakers)/TW (Tweeters)
RMS output power (reference):
300 W + 300 W (per channel at
8 ohms, 2 kHz)
SW (Subwoofers)
RMS output power (reference):
1,200 W + 1,200 W (per channel at
8 ohms, 100 Hz)
SHAKE-77
WF (Woofers)/MID (Mid speakers)/
TW (Tweeters)
Power Output (rated):
350 W + 350 W (at 4 ohms, 1 kHz,
1% THD)
RMS output power (reference):
600 W + 600 W (per channel at
4 ohms, 1 kHz)
SW (Subwoofers)
RMS output power (reference):
1,200 W + 1,200 W (per channel at
8 ohms, 100 Hz)
SHAKE-55
WF (Woofers)/TW (Tweeters)
Power Output (rated):
350 W + 350 W (at 4 ohms, 1 kHz,
1% THD)
RMS output power (reference):
600 W + 600 W (per channel at
4 ohms, 1 kHz)
SW (Subwoofers)
RMS output power (reference):
900 W + 900 W (per channel at
10 ohms, 100 Hz)
SHAKE-33
WOOFERS
Power Output (rated):
350 W + 350 W (at 4 ohms, 100 Hz,
1% THD)
RMS output power (reference):
600 W + 600 W (per channel at
4 ohms, 100 Hz)
MID (Mid speakers)/TWEETERS
RMS output power (reference):
500 W + 500 W (per channel at
5 ohms, 1 kHz)