Connecting Signals To The Dvi-D Input Module - Panasonic PT-D7700U Operating Instructions Manual

Connecting signals to the DVI-D input module

• Pin assignments and signal names of DVI-D input
terminal are listed in the table at right.
External view
• The DVI-D signal input module supports only a single link.
• The HDMI-DVI conversion cable is required to connect an HDMI-compliant device.
• The EDID mode setting must be selected so that it corresponds to the device to be connected. (Refer to page 72.)
• It is possible to connect the DVI-D input module with an HDMI- or DVI-compliant device, but with some devices the
images may not appear or other problems may be encountered in operation.
DVI-D input module (optional) ET-MD77DV
DVI Module
ET-MD77DV DVI-D IN
DVI-D signal
PC with DVI output
LAN
LAN terminal
(10BASE-T / 100BASE-TX)
For details on the network
function, refer to page 84.
DVD player or high-vision
video deck equipped
with DVD/HDMI terminal
Pin No. Signal
T.M.D.S data 2–
T.M.D.S data 2+
T.M.D.S data 2 / 4
shield
DDC clock
DDC data
T.M.D.S data 1–
T.M.D.S data 1+
T.M.D.S data 1/3
shield
Pin No. Signal
+5V
Ground
Hot plug detection
T.M.D.S data 0–
T.M.D.S data 0+
T.M.D.S data 0/5
shield
T.M.D.S clock
shield
T.M.D.S clock+
T.M.D.S clock–
33