Service Mode; Error Code Memory Function - Panasonic Lumix DMC-LS80P Service Manual

6 Service Mode

6.1.

Error Code Memory Function

1. General description
This unit is equipped with history of error code memory function, and can be memorized 16 error codes in sequence from the
latest. When the error is occurred more than 16, the oldest error is overwritten in sequence.
The error code is not memorized when the power supply is shut down forcibly (when the unit is powered on by the battery, the
battery is pulled out) because the error code is memorized to FLASH ROM when the unit is powered off normally.
2. How to display
The error code can be displayed by the following procedure:
Before perform the error code memory function, connect the AC adaptor or insert the battery.
(Since this unit has built-in memory, this error code memory function can be performed without inserting SD memory card.)
• 1. The temporary cancellation of initial setting:
Set the recording/playback switch to "[ Recording mode ] (camera mark
MAL PICTURE ]
While keep pressing [ E.ZOOM ], [ MENU ] and "[ UP
• 2. The display of error code:
Press [ E.ZOOM ], [ MENU ] and "[ LEFT
The display is changed as shown below when the above buttons is pressed simultaneously.
Normal display → Error code display → Operation history display → Normal display → .....
• 3. The change of display:
The error code can be memorized 16 error codes in sequence, however it is displayed 5 errors on the LCD.
Display can be changed by the following procedure:
"[ UP ] or [ DOWN
"[ LEFT ] or [ RIGHT
• 4. How to read the error date:
The error date code is displayed from the left in order at the year, month, day, time.
Error date information is acquired from "Clock setting" information when the error occurs. When the clock had been not set-
ting, it is displayed as "00000000".
] of Cursor button" simultaneously with the step 1 condition.
Example of Error Code Display
] of Cursor button" : It can be scroll up or down one.
] of Cursor button" : It can be display last 5 error or another 5 error.
(UP))" and press the mode button to select [ NOR-
] of Cursor button" simultaneously, turn the Power on.
13