This unit is equipped with history of error code memory function, and can be memorized 16 error codes in sequence from the latest. When the error is occurred

more than 16, the oldest error is overwritten in sequence.

The error code is not memorized when the power supply is shut down forcibly (i.e.,when the unit is powered on by the battery, the battery is pulled out) The error

code is memorized to Flash-ROM when the unit has just before powered off.

2. How to display

The error code can be displayed by ordering the following procedure:

Preparation

Attach the fully charged Battery, and insert the memory card (32MB or more).

Remove the lens cap.

Step 1. The Temporary Cancellation of "Initial Settings":

Set the [ Mode dial ] to "[ P ](Program AE mode)" and [ Drive mode dial ] to "Single".

While pressing [ DISP. ] button and [ AF/AE LOCK ] button simultaneously, turn the power on.

Step 2. Execute the Error Code Display Mode:

Press [ MENU/SET ] button, "[ LEFT ] of Cursor buttons" and [ AF/AE LOCK ] button simultaneously with the step 1 condition.

The display is changed as shown below when the above buttons are pressed simultaneously.

Normal display → Error code display → Camera information display → Normal display → .....

Error Code List

The error code consists of 8 bits data and it shows the following information.

ﬁle:///C|/Users/n.shetabi/AppData/Local/Temp/Rar$EXa0.550/viewing/SGML_VIEW_DATA/ALL/DMC-FZ1000P/SVC/DSC1407014CE/doc/DSC1407014CE_06.xml[11/12/2018 5:14:36 PM]

Example of Error Code Display

Table of Contents