Programmable Heating Mode - Jacuzzi J - 415 Owner's Manual

3. To exit the submenu, press button D to return to the Settings 1 Menu.
4. If you have programmed the Auto-
Heating cycle you will see the
Thermometer with wavy lines icon
next to word Heating on the display
(Figure F).
12.3

Programmable Heating Mode

Programmable heating mode is typically
selected by customers in warm climates
where heat up times are minimized due
to higher ambient temperatures. In this
mode, the water temperature is regulated
by the set temperature only when a
programmed heating cycle is running,
unless in summer logic page 68.
From the Heating Menu (Figure B, page 62), use the Quad Keypad
Down button to select the programmable setting, then press the Splash
button to enable selection, Figure G.
A. Program A Heating Mode
1. You are allowed to have two separate
programs in the programmable
mode, you can elect to use both or
just one. Press the Splash button to
enter the submenus for "Program A"
(Figure H).
2. From this menu (Figure I), you can
set the days, times, and duration.
With "Day Settings" selected press
the Splash button on the Quad
Keypad to access the submenus.
3. When you enter the submenu
(Figure J), you can choose the day(s)
you would like "Program A" to run for
a heating cycle. Press the Up or
Down button (on the Quad Keypad)
to scroll through and choose the days
you would like the heater to activate.
Press the Left or Right button to turn
"ON" ( ) or "OFF" the heater for
that day.
SETTINGS 1
Heating
UV Light
1
Filter
Press to
2
set filter or UV timer
HEATING
Eco-Mode
Auto-Heating
Programmable
2
Press to Set
PROGRAMS
Program A Program A
Program B
Press to Set
2
PROGRAM A
Day Settings Day Settings
Start Time
Duration
A
Press to Enter
2
PROGRAM A
Monday
Tuesday
Wednesday
Thursday
A
Friday
Saturday
Sunday
2
Press to Save
J-400
0 Days
OFF
Figure F
ENERGY EFFICIENT
Select
Figure G
A
Select
Figure H
1PM
Select
OFF
Figure I
OFF
OFF
Select
OFF
OFF
OFF
OFF
Figure J
Page 63