Advertisement
HALOGEN BULBS
This range hood requires two halogen bulbs (Type JCD, 12V, 20W Max, G-4 Base)
WARNING: Always switch off the electrical supply before carrying out any operation
on the appliance.
To change bulbs:
1.
Kick off the halogen bulb cover
2.
Remove the bulb by pulling sideward (DO NOT ROTATE).
3.
Replace with Type JCD, 12V, 20W Max, G-4 Base halogen bulb. Do not touch
replacement bulb with bare hands !
CAUTION:
1.
THE SURFACE, THE COVER OF THE HALOGEN BULBS MAY BE HOT. TAKE
CARE WHEN TAKING THE REPLACEMENT.
2.
BULBS MAY BE HOT. TAKE CARE WHEN TAKING THE REPLACEMENT.
OIL CUP
1.
To install the oil cup, and lock it on to the
motor blower.
2.
The oil cup should be cleaned frequently.
The oil accumulated inside the oil cup can
not be more than half. Use a warm
detergent solution.
3.
Allow it to be dry before refitting.
by using the flat screw driver.
¡
10
Advertisement
